swimming pool and supplies

Safety First – Spa Covers Should Be Locked Up

8 months ago

by kidbestbuy in swimming pool and supplies

Safety should always be a parmount matter in any activity we undertake. This is true for something as automatic and obvious as walking down a stair case, and for something as far-fetched and “daring” as deep sea diving.

Water safety is one issue that receives a fair amount of attention. Consider how many times you may have heard a message to remind us to be safe around water, to never go swimming alone, to always wear a life vest or some other flotation devices when boating. Even in our backyard, we are reminded to make sure the swimming pool is protected with a pool fence to keep kids and animals from falling in.

But what about our hot tubs? They too are filled with water. They also can drown a person. How do we provide safety with our spas?

Hot tub safety begins with a protective hot tub cover. Covers are relatively heavy and fit well in place, so they can protect against most accidental encounters. They are generally sturdy enough that even people walking on them will pose no risk to people, and will not damage them, either.

Hot tub covers keep “things” out of your hot tub. “Things” include the obvious, for example neighbourhood youngsters who wander over, even teenagers out on desperately waging war against boredom. “Things” also include wild animals – foxes, skunks, hares, deer, moles, etc. – and we can’t forget the pets, such as dogs and cats (and who knows…maybe a lost zoo creature just to add a touch of adventure to this list). And “things” also include six-legged little critters, spiders, leaves, twigs, bird droppings (yuck!) and who-knows-what-else might fall into your tub.

More Than Just a Cover Is Needed

But covering your tub is not enough. Locking it down is important, too. A cover can easily be removed – much harder to lift is a locked hot tub cover. We are saddened the story of McCutchanville IN firefighter Nathan Kuehne. While visiting the home of a friend for an overnight stay – overnight not planned, because he had consumed way too much alcohol to drive home that night – he decided to take a dip in his friend’s hot tub. At 27 years old, that was the last time he would ever have the chance to try a hot tub again.

In fact, we hear almost weekly of a hot tub drowning, and many could be prevented by following simple safety precautions., so many of which would be preventable by following a few common-sense safety tips. Water can be dangerous even when it is shallow. It’s a no-brainer to play it safe, both to protect those we care most about and to protect other folks and creatures.

Let me share another good reason to lock down your hot tub cover: wind. Yes, in extreme wind conditions a hot tub cover can actually lift and fly away. This might not happen more than once every year or two, but you want to avoid the damage of a hot tub cover being thrown through your window or smashing into your wall.

So take a moment to secure everybody’s safety and lock down your hot tub cover. It makes common sense to do so.

SHOP

Mommy's Helper Outlet Plugs 36 Pack

Prince Lionheart Corner Guards, Chocolate Brown

Primary Swimming Pool Water Chemistry

9 months ago

by kidbestbuy in swimming pool and supplies

Pool pH & Pool Alkalinity The pH and Alkalinity levels of swimming pool water affect many areas of the swimming pool and have to be stored at the correct ranges in case you count on to efficiently keep your swimming pool. The Alkalinity of pool water acts as a buffer for the pH, and helps prevent the pool pH level from fluctuating. The Alkalinity needs to be maintained at 80 – a hundred and twenty pap. The pH is the measure of the acidity of the swimming pool water, and the pH stage should be maintained at 7.2 – 7.6 pap. The pH of pool water is somewhat sensitive, but easily managed if the Alkalinity is kept in range. All primary pool take a look at kits ought to learn the pH and Alkalinity degree of pool water, and these ranges are easily adjusted with common water balancing pool chemicals. If the pool pH level shouldn’t be stored in range pool water could irritate the pores and skin and eyes of swimmers, corrode the pool floor and inside of the pool gear and make it very exhausting to maintain the chlorine stage of the swimming pool.

Pool Chlorine Stabilizer The chemical name of pool “Stabilizer” is Cyan uric Acid and it’s referred to by both titles. The Stabilizer stage of swimming pool water should be maintained at 30-50 pap. The Stabilizer degree is important, but is typically solely examined at first of the swimming season when a pool is opened. The Stabilizer in swimming pool water partially surrounds the chlorine on a molecular stage, to guard the chlorine and forestall the chlorine from being shortly burned off and used up by the sun. The signs of having too much Stabilizer or too little stabilizer in your pool water are very similar, and in case you experience problems maintaining a chlorine degree when all different chemical ranges are properly balanced the stabilizer degree needs to be tested.

If the Stabilizer stage assessments lower than 30 ppm it will likely be difficult to keep up a chlorine level, as a result of any chlorine added to your swimming pool will rapidly evaporate and burn off in direct sunlight. If the Stabilizer stage checks above 50 ppm it’ll also be troublesome to maintain a chlorine level. Reasonably than partially surrounding the chlorine in your pool water to guard the chlorine, too much stabilizer will fully surround the chlorine making it inactive. In this state the chlorine is unable to combine with bacteria and dangerous contaminants to sanitize your swimming pool. Stabilizer can be added to a swimming pool if obligatory to lift the level, nevertheless once Stabilizer is current in pool water it cannot be simply removed. To reduce the quantity of Stabilizer in a swimming pool the water should be diluted by partially draining the pool and re-filling with fresh water. 25% of the pool water needs to be drained and replaced with fresh water. The pool ought to be circulated for 12-24 hours, and the Stabilizer stage should be tested again. This course of ought to be repeated until the Stabilizer stage is within range. The chlorine tablets and granular chlorine used to sanitize a swimming pool each day is a pre-stabilized form of chlorine. Because of this the chlorine incorporates a small amount of stabilizer, and as chlorine is added to the pool a really small amount of Stabilizer can also be added to help preserve the level. This small amount of Stabilizer consistently added with pool chlorine doesn’t cause an issue in outdoor swimming pools as a result of water is splashed out or evaporates, and will get changed with recent water to dilute the Stabilizer. This pre-stabilized type of chlorine can’t be utilized in indoor swimming swimming pools, as a result of a lot less water evaporation occurs and the stabilizer level will slowly buildup. Indoor swimming pool homeowners want to use an UN-stabilized form of chlorine.
swimming pools designs
To Get more information on pool design you can visit our website here:
http://swimmingpoolhub.com

People that are trying to find more information about working with children, please make sure to check out the web page that is quoted in this paragraph.

SHOP

Little Giant PCP550 Pool Cover PumpSold as each. Manual pool cover pump. Removes standing water from pool covers and is ideal for household water transfer applications. Removable intake... Read More >